为什么我不能将素描上传到我的主板？

我正在使用Roboduino板，每当我上传眨眼草图时，我都会收到以下错误消息。我在相当一段时间内使用了该板。但是从现在起问题就出现了。为什么我不能将素描上传到我的主板？

- 我选择了正确的板 - Arduino的Duemilanove或用ATmega 328（含至极我从后面长工作）

- 我现在用正确的串口COM4（我已删除了电缆并重新连接它以确认它是COM4只有端口）。

- 我已迁到板的连接（引脚0和引脚1现在是免费的）

可能是什么问题？如何解决这个问题？

我遇到的错误是

avrdude: stk500_recv(): programmer is not responding 
avrdude: stk500_getsync() attempt 1 of 10: not in sync: resp=0x8d 
avrdude: stk500_recv(): programmer is not responding 
avrdude: stk500_getsync() attempt 2 of 10: not in sync: resp=0x8d 
Problem uploading to board. See http://www.arduino.cc/en/Guide/Troubleshooting#upload for suggestions. 
avrdude: stk500_recv(): programmer is not responding 
avrdude: stk500_getsync() attempt 3 of 10: not in sync: resp=0x8d 
avrdude: stk500_recv(): programmer is not responding 
avrdude: stk500_getsync() attempt 4 of 10: not in sync: resp=0x8d 
avrdude: stk500_recv(): programmer is not responding 
avrdude: stk500_getsync() attempt 5 of 10: not in sync: resp=0x8d 
avrdude: stk500_recv(): programmer is not responding 
avrdude: stk500_getsync() attempt 6 of 10: not in sync: resp=0x8d 
avrdude: stk500_recv(): programmer is not responding 
avrdude: stk500_getsync() attempt 7 of 10: not in sync: resp=0x8d 
avrdude: stk500_recv(): programmer is not responding 
avrdude: stk500_getsync() attempt 8 of 10: not in sync: resp=0x8d 
avrdude: stk500_recv(): programmer is not responding 
avrdude: stk500_getsync() attempt 9 of 10: not in sync: resp=0x8d 
avrdude: stk500_recv(): programmer is not responding 
avrdude: stk500_getsync() attempt 10 of 10: not in sync: resp=0x8d

来源

2015-09-05 Shiva N

1.尝试手动重置主板，突然点击arduino ide上的上传
2.您是否有其他主板？尝试将mega328p从另一个替换到该主板。我认为这款mega328p的bootloader损坏或芯片消失。因为当您将电路板连接到电脑时，您可以看到com端口。 –

这是低劣的Arduino的克隆，我认为董事会是没有得到duely重置了或连接是坏的。尝试选择Arduino UNO，因为板载ATmega328p可能使用optiboot引导加载程序。

来源

2015-09-11 09:29:33 Naaz

为什么我不能将素描上传到我的主板？

回答

相关问题