流浪/ VirtualBox的没有SSH连接和超时（Windows）中

Question

我一想设置这台机器：https://github.com/ByteInternet/hypernode-vagrant

当我做vagrant up我得到以下错误：Timed out while waiting for the machine to boot.

错误的完全上下文：

$ vagrant up 
Bringing machine 'hypernode' up with 'virtualbox' provider... 
==> hypernode: Will use PHP 7. If you want PHP 5.5 instead change the php version in local.yml. 
==> hypernode: Checking if box 'hypernode_php7' is up to date... 
==> hypernode: Clearing any previously set forwarded ports... 
==> hypernode: Clearing any previously set network interfaces... 
==> hypernode: Preparing network interfaces based on configuration... 
hypernode: Adapter 1: nat 
hypernode: Adapter 2: hostonly 
==> hypernode: Forwarding ports... 
hypernode: 80 (guest) => 8080 (host) (adapter 1) 
hypernode: 3306 (guest) => 3307 (host) (adapter 1) 
hypernode: 22 (guest) => 2222 (host) (adapter 1) 
==> hypernode: Running 'pre-boot' VM customizations... 
==> hypernode: Booting VM... 
==> hypernode: Waiting for machine to boot. This may take a few minutes... 
hypernode: SSH address: 127.0.0.1:2222 
hypernode: SSH username: vagrant 
hypernode: SSH auth method: private key 
Timed out while waiting for the machine to boot. This means that 
Vagrant was unable to communicate with the guest machine within 
the configured ("config.vm.boot_timeout" value) time period. 

If you look above, you should be able to see the error(s) that 
Vagrant had when attempting to connect to the machine. These errors 
are usually good hints as to what may be wrong. 

If you're using a custom box, make sure that networking is properly 
working and you're able to connect to the machine. It is a common 
problem that networking isn't setup properly in these boxes. 
Verify that authentication configurations are also setup properly, 
as well. 

If the box appears to be booting properly, you may want to increase 
the timeout ("config.vm.boot_timeout") value. 

当我手动启动虚拟机，我可以看到网络不能正常工作，因为它应该是。没有连接。当我将虚拟机的设置更改为桥接网络时，网络确实有效。但流浪者被配置为NAT。因此，我在设置或流浪文件中所做的任何更改似乎都会重新设置。

我想流浪1.9.3，1.9.2和1.9.0两个不同的电脑。我正在使用Virtualbox 5.1.18。当我过滤打倒“NAT”日志中看到以下错误（这是不完整的日志，只有一小部分）：

00:00:00.575454 SUP: Loaded VMMR0.r0 (C:\Program  Files\Oracle\VirtualBox\VMMR0.r0) at 0xfffff80c897b0000 - ModuleInit at  fffff80c897d3590 and ModuleTerm at fffff80c897d3a80 using the native ring-0 loader 
00:00:01.681747 Driver = "NAT" (cb=4) 
00:00:01.962037 SUP: Loaded VBoxDDR0.r0 (C:\Program Files\Oracle\VirtualBox\VBoxDDR0.r0) at 0xfffff80c898d0000 - ModuleInit at   0000000000000000 and ModuleTerm at 0000000000000000 using the native ring-0 loader 
00:00:02.196495 NAT: Guest address guess set to 10.0.2.15 by initialization 
00:00:02.204465 NAT: DNS#0: 192.168.178.1 
00:00:02.271317 NAT: Failed to redirect TCP 127.0.0.1:2222 -> 0.0.0.0:22 (Unknown error) 
00:00:02.271732 NAT: Failed to redirect TCP 0.0.0.0:3307 -> 0.0.0.0:3306 (Unknown error) 
00:00:02.272033 NAT: Failed to redirect TCP 0.0.0.0:2200 -> 0.0.0.0:80 (Unknown error) 
00:00:09.976199 NAT: Link up 
00:00:39.428974 NAT: DHCP offered IP address 10.0.2.15 
00:00:39.429404 NAT: DHCP offered IP address 10.0.2.15 
00:03:02.167191 NAT: DHCP offered IP address 10.0.2.15 
00:03:02.167820 NAT: DHCP offered IP address 10.0.2.15 
00:07:58.531621 NAT: Zone(nm:mbuf_cluster, used:0) 
00:07:58.532221 NAT: Zone(nm:mbuf_packet, used:0) 
00:07:58.532232 NAT: Zone(nm:mbuf, used:1) 
00:07:58.532419 NAT: Zone(nm:mbuf_jumbo_pagesize, used:0) 
00:07:58.532961 NAT: Zone(nm:mbuf_jumbo_9k, used:0) 
00:07:58.533255 NAT: Zone(nm:mbuf_jumbo_16k, used:0) 
00:07:58.533424 NAT: Zone(nm:mbuf_ext_refcnt, used:0) 
00:07:58.536529 Changing the VM state from 'DESTROYING' to 'TERMINATED' 

我怎样才能解决或调试呢？

UPDATE

过去几天我也重新尝试不同版本的VirtualBox和流浪的没有任何结果如下：

• VirtualBox的5.0.18
• VirtualBox的5.0.20
• VirtualBox虚拟5.0.36
• 流浪1.9.3

我也试过另一个盒子，它有同样的问题。所以它似乎不是盒子，而是主机。

而且我尝试了安装Windows 7的机器上使用完全相同的结果。我想我在配置中丢失了一些东西，但我不知道是什么，因为没有一个明确的指南来让它在Windows机器上运行。

UPDATE 2：难道我试过的机器可能不支持这种设置吗？我试图在BIOS中寻找虚拟化选项。

UPDATE 3：当我从主人到访客做ssh -v 127.0.0.1 -p 1222我得到以下错误。 SSH服务已启动并正在客户端运行。我检查了sshd service status。

$ ssh -v 127.0.0.1 -p 1222 
OpenSSH_7.3p1, OpenSSL 1.0.2k 26 Jan 2017 
debug1: Reading configuration data /etc/ssh/ssh_config 
debug1: Connecting to 127.0.0.1 [127.0.0.1] port 1222. 
debug1: connect to address 127.0.0.1 port 1222: Connection refused 
ssh: connect to host 127.0.0.1 port 1222: Connection refused 

UPDATE 4：我无法Ping任何互联网IP或域名从客户机。

Answer 1

人首先，改变第一接口NAT是正常行为。这是为了使流浪工作成为一项需求。

您可以检查两件事情： 1）首选项>网络> NAT网络。（设置应该是这样的）：

network settings

2）确保你的虚拟电缆连接

cable connected

3）也许你可以尝试另一种漂泊不定框。