如何从Gatling编写InfluxDB？

我的问题已经提出，但我没有成功解决我的问题。如何从Gatling编写InfluxDB？

我没有成功将我的数据从Gatling实时发送到InfluxDB。

我在Windows 10上。 Gatling版本：2.3.0（最后一个）。 InfortDB版本：1.3.5（最后是1.3.6）。

我gatling.conf：

data { 
    writers = [console, file, graphite]  # The list of DataWriters to which Gatling write simulation data (currently supported : console, file, graphite, jdbc) 
    console { 
     #light = false    # When set to true, displays a light version without detailed request stats 
    } 
    file { 
     #bufferSize = 8192   # FileDataWriter's internal data buffer size, in bytes 
    } 
    leak { 
     #noActivityTimeout = 30 # Period, in seconds, for which Gatling may have no activity before considering a leak may be happening 
    } 
    graphite { 
     #light = false    # only send the all* stats 
     host = "127.0.0.1"   # The host where the Carbon server is located 
     port = "2003"    # The port to which the Carbon server listens to (2003 is default for plaintext, 2004 is default for pickle) 
     protocol = "tcp"   # The protocol used to send data to Carbon (currently supported : "tcp", "udp") 
     rootPathPrefix = "gatling" # The common prefix of all metrics sent to Graphite 
     #bufferSize = 8192   # GraphiteDataWriter's internal data buffer size, in bytes 
     #writeInterval = 1   # GraphiteDataWriter's write interval, in seconds 
    } 
    }

我influxdb.conf：

[http] 
    # Determines whether HTTP endpoint is enabled. 
    enabled = true 


    # The bind address used by the HTTP service. 
    bind-address = "127.0.0.1:8086" 


### 
### [[graphite]] 
### 
### Controls one or many listeners for Graphite data. 
### 


[[graphite]] 
    # Determines whether the graphite endpoint is enabled. 
    enabled = true 
    database = "gatlingdb" 
    # retention-policy = "" 
    bind-address = ":2003" 
    protocol = "tcp" 
    # consistency-level = "one" 
    templates = [ 
     "gatling.*.*.*.*.measurement.simulation.request.status.field" 
    ]

我gatlingdb数据库上InfluxDB创建，它保持为空。

当我尝试：

C:\InfluxDB-1.3.5-1>influx -host 127.0.0.1

我连接到InfluxDB

>USE gatlingdb

我连接到我的数据库。然后：

>SHOW SERIES

和

>SELECT * FROM gatling

不返回任何内容。它是空的。

注：我把“FROM加特林”因为我把我的gatling.conf：rootPathPrefix =“加特林”

我没有下载石墨，但我看到InfluxDB接受石墨协议。我假设我可以将数据从Gatling发送到InfluxDB。我当然错过了什么。

我成功地将InfluxDB连接到Grafana，并显示来自其他数据库的数据。我错过了Gatling和InfluxDB之间的联系。

在此先感谢您的帮助，我绝对需要它！

安东尼

来源

2017-10-12 Anthony

我差不多完成了用于显示所有创建使用加特林，Grafana和InfluxDB整个监控基础架构所需的步骤文章（顺便说一句，而无需单独安装石墨），它的工作对我非常好。我想我会在几天内将它发布到我的博客blazemeter.com上！敬请关注！ http://blazemeter.com/blog

在那里你甚至会找到现成的解决方案来启动Docker中的所有东西。

但直到（如果是迫切需要你），可以分享我的InfluxDB配置部分：

[[graphite]] 
enabled = true 
bind-address = ":2003" 
database = "graphite" 
retention-policy = "" 
protocol = "tcp" 
batch-size = 5000 
batch-pending = 10 
batch-timeout = "1s" 
consistency-level = "one" 
separator = "." 
udp-read-buffer = 0

gatling.conf：

graphite { 
    light = false    # only send the all* stats 
    host = "localhost"   # The host where the Carbon server is located 
    port = 2003    # The port to which the Carbon server listens to (2003 is default for plaintext, 2004 is default for pickle) 
    protocol = "tcp"   # The protocol used to send data to Carbon (currently supported : "tcp", "udp") 
    rootPathPrefix = "gatling" # The common prefix of all metrics sent to Graphite 
    bufferSize = 8192   # GraphiteDataWriter's internal data buffer size, in bytes 
    writeInterval = 1   # GraphiteDataWriter's write interval, in seconds 
}

你需要检查的第一件事是， InfluxDB实际上通过石墨协议接受传入指标。例如，在InfluxDB启动日志期间，您应该找到以下行：

influxdb_1 | [I] 2018-01-26T13:40:37Z Listening on TCP: [::]:2003 service=graphite addr=:2003

来源

2018-01-26 13:41:53

如何从Gatling编写InfluxDB？

回答

相关问题